The Shimano WH-R8170 wheelset has 60 mm high carbon rims and is the perfect complement for your Ultegra R8100 road bike groupset with Center Lock disc brake. Unlike Dura-Ace R9200 wheelsets, its steel pawl freehub is compatible not only with 12-speed but also with 11-speed cassettes. The model scores with top aerodynamics for high speeds, tubeless compatibility and stiffness. The rims have a jaw width of 21 mm for tires up to 32 mm wide and feature the wind tunnel-tested D2 design. They were each fitted with 24 double butted stainless steel spokes, with a specific lacing pattern used on the rear wheel to balance the spoke tension. At the center of the wheels rotate 12 mm thru-axle hubs with E-Thru technology for more torsion resistance. Cone bearings ensure durability and ease of maintenance.
Wheel Size: 28"
Tire Type: clincher tire
Number of Spokes: 24
Brake Type: Center Lock Disc
Tubeless System: TL/UST
Rim Flange: with hook
Dimensions (ETRTO): 21-622
Inner Width: 21 mm
Outer Width: 28 mm
Depth: 60 mm
Valve Hole Diameter: SV / Presta (6.5 mm)
Rim Material: carbon (CFRP)
Bearings: cup & cone
Body Material: aluminum
Bearings: cup & cone
Body Material: aluminum
Freehub Body Material: steel
Freehub Body: pawls
Rear Lacing Pattern: OPTBAL (2:1)
Spoke Type: straight pull / double butted (2.0-1.6-2.0)
Spoke Material: stainless steel
Nipple Material: aluminum
- flat aerodynamic D2 profile, tested in the wind tunnel
- increased efficiency thanks to tubeless compatibility
- rear wheel with 2:1 lacing to compensate for tensions
- full compatibility with 12- and 11-speed cassettes
- hubs with internal grease coat
- polished bearings, CBN-finished, contact seals
- aluminum axles
- lacquered rims, anodized hub body
Angular contact ball bearings of the cup & cone type are superior to sealed cartridge bearings in terms of load carrying capacity, as they distribute lateral and vertical forces better, and thus run particularly smoothly and last a long time. They are also easier to adjust, maintain and replace.
E-Thru
E-Thru is a tool-free thru-axle system from Shimano that optimizes the stiffness-to-weight ratio and ensures easy handling via its reliable internal cam mechanism. It is characterized by a high torsion resistance and thus also supports cornering at high speed. E-Thru thru-axle hubs and thru-axles are available in the corresponding over locknut dimensions for front and rear.
- Rims: black (carbon)
- Hub: black
- Spokes: black
- Nipples: black
Freehub: Shimano Road
Gearing: 8-/9-/10-/11-/12-speed
Note: The assembly of 8-/9-/10-speed cassettes on a Shimano Road Rotor requires a 1.85 mm spacer ring.
Manufacturer Number: E-WHR8170C60LFERED
- 2 x tubeless rim tape
Specifications:
Application: Road, Triathlon & Time TrialWheel Size: 28"
Tire Type: clincher tire
Number of Spokes: 24
Brake Type: Center Lock Disc
Tubeless System: TL/UST
Technical Information - Rim:
Type: D2Rim Flange: with hook
Dimensions (ETRTO): 21-622
Inner Width: 21 mm
Outer Width: 28 mm
Depth: 60 mm
Valve Hole Diameter: SV / Presta (6.5 mm)
Rim Material: carbon (CFRP)
Technical Information - Front Hub:
Over Locknut Dimension: 12 x 100 mm thru-axleBearings: cup & cone
Body Material: aluminum
Technical Information - Rear Hub:
Over Locknut Dimension: 12 x 142 mm thru-axleBearings: cup & cone
Body Material: aluminum
Freehub Body Material: steel
Freehub Body: pawls
Technical Information - Lacing:
Front Lacing Pattern: 2-crossRear Lacing Pattern: OPTBAL (2:1)
Spoke Type: straight pull / double butted (2.0-1.6-2.0)
Spoke Material: stainless steel
Nipple Material: aluminum
Approved For:
Recommended Tire Width: 25-622 to 32-622Features:
- maximum aerodynamics for highest speed- flat aerodynamic D2 profile, tested in the wind tunnel
- increased efficiency thanks to tubeless compatibility
- rear wheel with 2:1 lacing to compensate for tensions
- full compatibility with 12- and 11-speed cassettes
- hubs with internal grease coat
- polished bearings, CBN-finished, contact seals
- aluminum axles
- lacquered rims, anodized hub body
Technology:
Cup and Cone BearingsAngular contact ball bearings of the cup & cone type are superior to sealed cartridge bearings in terms of load carrying capacity, as they distribute lateral and vertical forces better, and thus run particularly smoothly and last a long time. They are also easier to adjust, maintain and replace.
E-Thru
E-Thru is a tool-free thru-axle system from Shimano that optimizes the stiffness-to-weight ratio and ensures easy handling via its reliable internal cam mechanism. It is characterized by a high torsion resistance and thus also supports cornering at high speed. E-Thru thru-axle hubs and thru-axles are available in the corresponding over locknut dimensions for front and rear.
Color info:
black:- Rims: black (carbon)
- Hub: black
- Spokes: black
- Nipples: black
Models:
28" set (front 12x100 + rear 12x142) Shimano:Freehub: Shimano Road
Gearing: 8-/9-/10-/11-/12-speed
Note: The assembly of 8-/9-/10-speed cassettes on a Shimano Road Rotor requires a 1.85 mm spacer ring.
Manufacturer Number: E-WHR8170C60LFERED
Contents:
- 1 x Shimano Ultegra WH-R8170-C60-TL wheelset (front & rear)- 2 x tubeless rim tape
Gram Weight:
- black/28" set (front 12x100 + rear 12x142) Shimano: 1649 g (Grams)
NEW WHEELS
The final element of the new DURA-ACE and ULTEGRA packages are completely revamped wheelset lineups. Top line features include carbon rims, three rim depths, tubeless compatibility (plus tubular options), and an exceptional balance of rigidity, aerodynamics, and low weight. All the new tubeless wheels have a 21mm internal rim width and utilize a hooked bead, meaning you can use clincher tires and tubes if needed.
NEXT-GEN DURA-ACE - NEVER COMPROMISE
Thousands of engineering decisions and refinements, over the course of several years, were made with the singular aim of making you faster. This is the Science of Speed, and it’s what sets Shimano apart.
